The Yellow Brick Road

Open discussion about all things BJFE

Moderator: Moderators

Re: The Yellow Brick Road

Postby thetoneseeker » Tue May 08, 2012 10:05 am

I swear I should stop reading these posts. Every time I read them a chunk of money in my bank disappears! haha
User avatar
thetoneseeker
 
Posts: 201
Joined: Mon Dec 12, 2011 1:19 am
Location: Singapore
Guitars:: Nash S-57, Washburn N6
amps: THD Bi-Valve 30 with 2 x 12 THD Cab, 1972 HiWatt DR103 with Vox Cab & Fanes
pedals: 14

Re: The Yellow Brick Road

Postby Hulakatt » Tue May 08, 2012 1:24 pm

cajone5 wrote:I've been down the "operable but independent" rabbit hole before and the only way to make it truly work is also make the order switchable... and at that point you're better off with two separate pedals.

I say if there isn't magic 4th knob that can take the pedal from v1 to v2 then just make them separate boxes. Voting for the following names :)

.. V1 = sparkling orange
.. V2 = sparkling yellow

So I know you won't have anything definite as far as timeline but any idea on when this project would finally come to life? Are we talking weeks or months here? Gotta start saving my $$ :mrgreen:


I concur wholeheartedly Sir! I think it would be best as 2 separate pedals, the v1/Sparkling Orange and the v2/Sparkling Yellow
"I don't make things in order to have finished objects, I have finished objects as a by-product of my need to always be making."
-Adam Savage

BJFe: SBEQ, DRD, MG, EGDM
Bearfoot: BPB
User avatar
Hulakatt
 
Posts: 305
Joined: Sat Mar 12, 2011 9:00 pm
Location: Pittsburgh
Guitars:: Edwards LP, pine Tele parts-o-caster, Strat parts-o-caster
amps: Marsh 5e3, Triode jtm50 "Black Flag" 50 watt, Silvertone 1484, "Drip Edge" Fender Bandmaster
pedals: 42

Re: The Yellow Brick Road

Postby duaner58 » Tue May 08, 2012 4:25 pm

Love the idea of V1 and V2 seperately w/ out knobs (4th) and switches.
duaner58
 
Posts: 105
Joined: Tue Mar 01, 2011 12:52 pm
Location: Chicago
Guitars:: MJT Tele w/ MFF Tombucker and Country Coil
Gibson CS R7 Sheptone "skydogged" tribute and Betts pups
amps: Tungsten Buckwheat
pedals: 5

Re: The Yellow Brick Road

Postby SteveA » Tue May 08, 2012 10:02 pm

Whatever happens with this project COUNT ME IN!! I've always loved the SYOD v2 (the v1 didn't really have the same great sound on my rig).
BJF: BPB, CHII, MG, MH4K, PGC, PH, LGW & RRB
SteveA
 
Posts: 789
Joined: Mon Oct 26, 2009 11:24 pm
Guitars:: Fender Stratocaster CS Pro
amps: Divided by 13 EDT
pedals: 12

Re: The Yellow Brick Road

Postby cannikin » Wed May 09, 2012 2:15 am

Agreed, separate pedals. Would love to get my hands on a v1. Likewise prefer no 4th knobs :)
User avatar
cannikin
 
Posts: 98
Joined: Thu Sep 25, 2008 7:37 pm
Location: Seattle Washington
Guitars:: Jaguar,
amps: Silverface Princeton reverb
pedals: 18

Re: The Yellow Brick Road

Postby amp boy » Wed May 09, 2012 1:44 pm

i like the idea of the 4th knob control...........for tailoring the pedal.
and separate pedals for the different editions seems wanted, though a custom edition would be nice, so those that can handle a switch would take advantage of having 2 circuits in one pedal.

kinda like one may work great for how your running things one day.......a few weeks later....the waters may part with the other circuit and a different setup.
:coffeenews
User avatar
amp boy
 
Posts: 74
Joined: Mon Sep 05, 2011 10:40 pm
Location: toronto
pedals: 0

Re: The Yellow Brick Road

Postby cajone5 » Wed May 09, 2012 1:59 pm

amp boy wrote:i like the idea of the 4th knob control...........for tailoring the pedal.
and separate pedals for the different editions seems wanted, though a custom edition would be nice, so those that can handle a switch would take advantage of having 2 circuits in one pedal.

kinda like one may work great for how your running things one day.......a few weeks later....the waters may part with the other circuit and a different setup.
:coffeenews


Yea I like the idea of the 4th control as well to sweep between sounds / circuits. My rig changes and I want something that can adapt. It's nice finding something that's "just right" but it sucks realizing you cannot dial it in appropriately if anything changes. Really looking forward to the release of the Bearfoot whatever-its-gonna-be-called :evil
Timing has a lot to do with the outcome of a rain dance.

BJFe: DIY CB, DIY FF 3.5%
User avatar
cajone5
 
Posts: 931
Joined: Wed May 19, 2010 9:44 am
Location: Austin, TX
Guitars:: 2006 Taylor 214e
2014 Fender Strat 60th Anniversary
Mainland Tenor Uke
amps: 5e3 Deluxe
'68 Custom Deluxe Reverb
pedals: 99

Re: The Yellow Brick Road

Postby seans » Wed May 09, 2012 2:07 pm

Oooooo... this is exciting! I had v2 and have missed it since we parted ways. I would like the choice of both in one pedal but would also be very happy with a v2!!
BJFE: HBOD, BBOD deluxe, Bone Bender kit, 109 Fuzz, PGC
seans
 
Posts: 225
Joined: Mon Jun 02, 2008 4:27 am
Location: UK
Guitars:: Gibson LP Goldtop w. Bearknuckle P90s , Danocaster Blackguard Telecaster
amps: 1963 AC30, LazyJ J20
pedals: 0

Re: The Yellow Brick Road

Postby amp boy » Wed May 09, 2012 6:22 pm

cajone5 wrote:
amp boy wrote:i like the idea of the 4th knob control...........for tailoring the pedal.
and separate pedals for the different editions seems wanted, though a custom edition would be nice, so those that can handle a switch would take advantage of having 2 circuits in one pedal.

kinda like one may work great for how your running things one day.......a few weeks later....the waters may part with the other circuit and a different setup.
:coffeenews


Yea I like the idea of the 4th control as well to sweep between sounds / circuits. My rig changes and I want something that can adapt. It's nice finding something that's "just right" but it sucks realizing you cannot dial it in appropriately if anything changes. Really looking forward to the release of the Bearfoot whatever-its-gonna-be-called :evil


i actually meant the fourth knob to be as another tailoring control like on the Beest, Beetch...other pedals etc.
A separate switch would be for changing between circuits, as from what i read earlier, that would be needed....the option for gradual circuit blending would not be an option in a one stompswitch pedal.

i dig how this thread has some life to it on here...it's nice to read some things going on.
User avatar
amp boy
 
Posts: 74
Joined: Mon Sep 05, 2011 10:40 pm
Location: toronto
pedals: 0

Re: The Yellow Brick Road

Postby Donner » Thu May 10, 2012 9:23 am

Yeah maybe this is a bit confusing ,,,,

The combo pedal would have a fourth knob(actually a rotary switch) that would have 2 clicks on it - one for V1, then you could click the rotary and it would change the parts to V2 ( not unlike the FGC comp/sustain switch)

I do understand that many people might never use the other 'click/version' hmmm
User avatar
Donner
Site Admin
 
Posts: 3547
Joined: Mon Feb 26, 2007 11:52 pm
Location: St.Louis
Guitars:: Strats, Teles, LPSpecial, Silvertone, #1 is a Gretschified Flying V
amps: custom plexitweed KT66>2x12 Greenbacks, Deluxe and Princeton Reverbs
pedals: 0

PreviousNext

Return to BJFE Discussion

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 1 guest