Need a good case to house a FolkFuzz 3.5% in, any suggstions

[jdandry]

Looking for a nice case for a FolkFuzz 3.5% board I have. Something that will look good along side my
BJFe stuff. Any suggestions on where to get good pedal cases?

[jfromel]

Looking for a nice case for a FolkFuzz 3.5% board I have. Something that will look good along side my
BJFe stuff. Any suggestions on where to get good pedal cases?

Use a Hammond 1590B enclosure. Sand the oxidation off the enclosure, the more you sand with the finer grit the more shiny your pedal will be!!!! For paint try using MetalCast from Duplicolor then give it 5+ coats of clear coat, both should be available in a rattle can from your local auto supply shop. I will leave the rest up to your imagination.

A good place to get the enclosure is from Small Bear or Pedal Parts Plus, both are ace.

[jdandry]

Thanks, I'll try it out.