These are a few of the more extreme bends I did with Lyric HG. Remember to experiment and see if you would benefit from having the ends 180 opposite directions as Lyric HG will not twist at these short lengths. I forgot to do a close up of the connection from MHvT > HBOD which goes off the side of the board, then under and up to the HBOD. It has the 180 placed jacks. I also have another bend from the Timeline to the SBEQ which is a little crazy though similar to the Fulltone MDV-2 > Octron (silver). You can get a sense of the size of the Neutrik jack verse the Switchcraft jack on the purple Orbit flanger shot.
The place I get them from is really good about sizing and are very clear on their site on how to measure the length you need. You can note if you want an 11" or something by choosing 12" and say cut to 11". The other thing to notice is the Neutrik jacks are much longer, so I would advise adding an inch or two to what you think you need.
http://www.earsproaudio.com/index.html I got less than 24 hour turn around last week! I used to wait 2- 4 weeks for Lava!
I picked up some bulk Siren II and a few ends, so I can try it in my two combo amps and build a dedicated cable for my attenuator. I do have extra to do my 2x12 cab, but now I just need time!
Gunbarrel Guitars, Evidence Audio wires.