analoghog wrote:Eskimo_Joe wrote:I am a complete voltage novice and have just a general question. If I'm running my pedals off of Voodoo Lab Pedal Powers, how would I go about changing voltage?
well, i'm learning all the time too Matt...right now i'm using a Voodoo Pedal Power 2+ right now....they have Isolated grounded outputs !!!...some others don't.....my favorite aspect is Voodoo makes extra cables you can buy...they have a doubling cable ( 2 outputs into 1 cord end ) that makes 2 9v outputs 1-18v end....also each output has a DIP switch that makes that individual 9v output into a 12v output....it just makes for a really flexible power suppy !!...it also has a Sag control if you want to control & lower voltages below 9v's, and it has 2 L6 outputs that can put out 9v's or 15-16v depending on the DIP switch used...
Thanks Analoghog! I had noticed the dip switches, but never tried doing anything with them, so it's good to know what they can do now. That's interesting about the cables that combine the two 9 volts.
This is a question the the whole group ---- out of all the BJFs, what one is enhanced most by changing the voltage? (i.e. where should I start?)
