SBEQ love

Open discussion about all things BJFE

Moderator: Moderators

SBEQ love

Postby DocRock » Mon Dec 16, 2013 4:52 pm

I had read elsewhere about "always on" pedals, and this made me think of my Bearfoot SBEQ. I almost never tweak my amp settings at a gig anymore. I use my SBEQ as my on all the time "governor" of sorts. Even when I'm running the pedal with a neutral EQ setting, I still like the way it makes everything sound when it's on. It really is a great tool.

I run SBEQ into my BPB at the end of my chain. My favorite aspect of SBEQ is how it just wakes everything up. SBEQ is the consummate problem solver for me. For example, I've found myself gigging in rooms where I felt my amp was a bit too strident on the top end, but turning down the treble on the amp almost cut too much life out of the sound. Enter SBEQ ... I leave my amp where I normally like it set (most knobs around 12:00), and use the treble knob on the SBEQ to dial back some of that harshness ... voila! Amp is softened just enough, but the basic tone and clarity is still there. This also works with the low end control. As needed, I can add just enough without the tone getting bloated. As has been posted elsewhere, the knob parameters on SBEQ are in between where most amp eq knob parameters tend to fall. I've found that SBEQ can fix things where trying to do it with the amp itself can sometimes be frustrating.

Anybody else have similar experiences or applications?
Get in where you fit in.
DocRock
 
Posts: 631
Joined: Tue Feb 27, 2007 1:52 pm
Location: The Caves of Altamira
Guitars:: 2010 Linhof Custom
Fender '69 Thinline Telecaster with Harmonic Design pickups (MIM)
1990 Fender Squier II Stratocaster with G&L MFD pickups
amps: Aiken Sabre
1955 "Montgomery Ward"-branded Valco 1x8 combo
pedals: 9

Re: SBEQ love

Postby con brio » Mon Dec 16, 2013 7:31 pm

While I cant compare directly to the SBEQ (I'm new to BJFE et al), I have a voodoolab Giggity for very similar purpose. It’s at the end of my board, always on, and its the there to make thing more alive and to correct for room/mix/amp etc. It has become a necessity for me.

I also really value being able to tweak my EQ from my board (where i hear it) than have to walk over to the amp, tweak, walk back, listen (rinse, repeat).
User avatar
con brio
 
Posts: 4
Joined: Wed Dec 11, 2013 6:07 pm
Guitars:: Fender 2012 American Standard Tele
amps: Blackstar HT1R, Fender Greta + HT408 cab
pedals: 9

Re: SBEQ love

Postby DocRock » Wed Dec 18, 2013 2:40 am

con brio wrote:I also really value being able to tweak my EQ from my board (where i hear it) than have to walk over to the amp, tweak, walk back, listen (rinse, repeat).


That is a most excellent point. :)
Get in where you fit in.
DocRock
 
Posts: 631
Joined: Tue Feb 27, 2007 1:52 pm
Location: The Caves of Altamira
Guitars:: 2010 Linhof Custom
Fender '69 Thinline Telecaster with Harmonic Design pickups (MIM)
1990 Fender Squier II Stratocaster with G&L MFD pickups
amps: Aiken Sabre
1955 "Montgomery Ward"-branded Valco 1x8 combo
pedals: 9

Re: SBEQ love

Postby Hulakatt » Wed Dec 18, 2013 1:34 pm

I don't even really tweak the eq that much on mine. I just use it as a "fat filter". It makes everything sound a little thicker and warmer whilst still retaining cleanliness. Sometimes I'll boost the bass or treble into dirt to alter it's nature but not often.
"I don't make things in order to have finished objects, I have finished objects as a by-product of my need to always be making."
-Adam Savage

BJFe: SBEQ, DRD, MG, EGDM
Bearfoot: BPB
User avatar
Hulakatt
 
Posts: 305
Joined: Sat Mar 12, 2011 9:00 pm
Location: Pittsburgh
Guitars:: Edwards LP, pine Tele parts-o-caster, Strat parts-o-caster
amps: Marsh 5e3, Triode jtm50 "Black Flag" 50 watt, Silvertone 1484, "Drip Edge" Fender Bandmaster
pedals: 42


Return to BJFE Discussion

Who is online

Users browsing this forum: No registered users and 1 guest