Should the SBEQ replace my current EQ pedal?

Open discussion about all things BJFE

Moderator: Moderators

Re: Should the SBEQ replace my current EQ pedal?

Postby jonnyrocket » Fri Sep 03, 2010 3:51 pm

Donner wrote:Ah thats a great combination - I have a similar one that sounds just like a Honey Bee :mrgreen:

I bet you would like the EGDM with that little guy :thumbup:


Oh donner,

I could not help myself. I had to get the EGDM after that comment. :lol:

I'll let you know how I like it when I get it.

Cheers,
Jon
RMC3FL>Gemini III>Sunface> Gramps+>Atomic Boost>PC-2A>MGV>Timmy>T1m Buffer>EGDM4K>LGW>Fetto C-Luxe>DRD/DRD Hot/HBeest>HBOD>Black '65>SBEQ>DBD>Launch Pad>ST-200>Solemate
jonnyrocket
 
Posts: 147
Joined: Sat Aug 28, 2010 12:29 pm
Location: NYC
Guitars:: LsL Saticoy Milan (9.5” Soft V maple neck, ash body, Alinco V pickups), PRS SC 250 (SD Pearly Gates), Taylor 314ce.
amps: Swart AST MKII (Swart Cab with one 12” Scumback H75 Speaker)
pedals: 20

Re: Should the SBEQ replace my current EQ pedal?

Postby thesjkexperience » Fri Sep 03, 2010 10:39 pm

jonnyrocket, make sure you take some time to learn the EGDM! There are so many sounds in it just by changing voltages! If things arent working out make sure you come back and ask questions as you need to approach Bjorn's pedals with a very open mind and lots of curiosity and imagination. THe rewards are great!
Gunbarrel Guitars, Evidence Audio wires.
User avatar
thesjkexperience
 
Posts: 1162
Images: 5
Joined: Thu Nov 05, 2009 2:14 am
Location: Gunbarrel, Colorado
Guitars:: All Gunbarrel Custom Guitars: Teles, Jazzmasters, Strats, LP TV double cut, 1 54 LP flametop. Now all with Gunbarrel hand wound in Colorado pickups!
amps: Tungsten Buckwheat, Crema Wheat & Cortez. Morgan AC40 Deluxe w/2 Golds!
pedals: 15

Re: Should the SBEQ replace my current EQ pedal?

Postby strings2wood » Sat Sep 04, 2010 1:51 am

thesjkexperience wrote:jonnyrocket, make sure you take some time to learn the EGDM! There are so many sounds in it just by changing voltages! If things arent working out make sure you come back and ask questions as you need to approach Bjorn's pedals with a very open mind and lots of curiosity and imagination. THe rewards are great!


Good call.
The trim pot inside is also important in terms of matching your amp.
This is time well spent to get it just right. :pedallove

The only other thing about this one is...IT MIGHT GET LOUD!
It's always my lowest setting for volume of ANY BJF pedal I own.

jonnyrocket wrote: I play mainly with single coils, but use humbuckers as well. I have many od pedals and a few distortions. I would like to know if anyone here has had the chance to play through a SBEQ and a Barb EQ.

I like the Barb EQ so far, but given how impressed I was with the HBOD, i wonder if the SBEQ would also impress me and ultimately kick the Barb EQ off my board.

I look forward to hearing your comments.
cheers,
Jon


the SBEQ- before your OD's will make single coils sound like humbuckers.
At the end of the chain- it's a way of shaping any of your overdrives.
Another of Mr. Juhl's pedals that can beneift from different v options, (as per the power supply thread).

I'm selling mine to pay for a KLON.
User avatar
strings2wood
 
Posts: 228
Joined: Mon Oct 15, 2007 8:46 am
Location: Melbourne, Australia
Guitars:: C.S. '56 Strat; C.S. '57 Tele; C.S. 53 Tele; Martin John Mayer OM-28; Maton FG-100;
amps: Fender Blonde Tolex Vibro King;
Matchless Lightning 2 x 12 with reverb;
pedals: 0

Re: Should the SBEQ replace my current EQ pedal?

Postby jonnyrocket » Sun Sep 05, 2010 12:21 am

thesjkexperience, thanks for the advise. I will spend a lot of time playing with it and adjusting the internal trim pot. I aleas have fun tweaking pedals and stacking them to get new sounds.

Strings2wood, I will be careful with the volume. I live in a small apartment and my neighbors are not very happy when I play guitar. Can't wait for my attenuator to arrive.

Hope you are all enjoying the weekend,
Jon
RMC3FL>Gemini III>Sunface> Gramps+>Atomic Boost>PC-2A>MGV>Timmy>T1m Buffer>EGDM4K>LGW>Fetto C-Luxe>DRD/DRD Hot/HBeest>HBOD>Black '65>SBEQ>DBD>Launch Pad>ST-200>Solemate
jonnyrocket
 
Posts: 147
Joined: Sat Aug 28, 2010 12:29 pm
Location: NYC
Guitars:: LsL Saticoy Milan (9.5” Soft V maple neck, ash body, Alinco V pickups), PRS SC 250 (SD Pearly Gates), Taylor 314ce.
amps: Swart AST MKII (Swart Cab with one 12” Scumback H75 Speaker)
pedals: 20

Re: Should the SBEQ replace my current EQ pedal?

Postby thesjkexperience » Sun Sep 05, 2010 10:51 am

Jon, the EGDM stacks very well, but it is best earlier in the chain. It also loves Strats & Teles. You can see in my signature where it sits in my chain. I rarely run any of my drives above noon for rhythm and will add another BJFE dirt pedal(s) or the SBEQ to boost solos or go for more grind.

One of my favorite stacks is the EGDM > Honey Bee OD and it also kills into the Sea Blue EQ. But as Bjorn says "have fun" who knows what you will discover :music

Strings2wood nailed the SBEQ positioning. (he is also a sissy for buying a Klon :pottytrain1 ) I used to run the SBEQ before dirt when I used a clean boost. Over time I realized clean boosts suck verses BJFe colors and moved to my current chain. I do have a DAM Red Rooster to boost the front end of pedals (and amps), but it isnt on the board and I bring it out for fun.
Gunbarrel Guitars, Evidence Audio wires.
User avatar
thesjkexperience
 
Posts: 1162
Images: 5
Joined: Thu Nov 05, 2009 2:14 am
Location: Gunbarrel, Colorado
Guitars:: All Gunbarrel Custom Guitars: Teles, Jazzmasters, Strats, LP TV double cut, 1 54 LP flametop. Now all with Gunbarrel hand wound in Colorado pickups!
amps: Tungsten Buckwheat, Crema Wheat & Cortez. Morgan AC40 Deluxe w/2 Golds!
pedals: 15

Re: Should the SBEQ replace my current EQ pedal?

Postby strings2wood » Tue Sep 07, 2010 6:10 am

thesjkexperience wrote:Strings2wood nailed the SBEQ positioning. (he is also a sissy for buying a Klon :pottytrain1 ) I used to run the SBEQ before dirt when I used a clean boost. Over time I realized clean boosts suck verses BJFe colors and moved to my current chain. I do have a DAM Red Rooster to boost the front end of pedals (and amps), but it isnt on the board and I bring it out for fun.


Why I say that's a lovely
sea blue shaped Klonnet....errrr I mean bonnet
you're wearing there Miss Sissy....errrr I mean Prissy.
I say that's a joke son.
That boy strings reminds me of Paul Revere's ride..........
"a little light in the belfry!!!"
Image

why sissy is it......them's fighting woids!!!!!!
Image
User avatar
strings2wood
 
Posts: 228
Joined: Mon Oct 15, 2007 8:46 am
Location: Melbourne, Australia
Guitars:: C.S. '56 Strat; C.S. '57 Tele; C.S. 53 Tele; Martin John Mayer OM-28; Maton FG-100;
amps: Fender Blonde Tolex Vibro King;
Matchless Lightning 2 x 12 with reverb;
pedals: 0

Re: Should the SBEQ replace my current EQ pedal?

Postby melodichaotic » Tue Sep 07, 2010 8:06 am

:laughing4
melodichaotic
 
Posts: 548
Joined: Wed May 13, 2009 11:38 pm

Re: Should the SBEQ replace my current EQ pedal?

Postby jonnyrocket » Tue Sep 07, 2010 8:26 am

I really can't wait to try the EGDM. For all i have read and heard, i think i am going to love it. I have been playing with a lot of od's these past week and am looking to narrow it down to two or three pedals. So far the Honeybee is the only one that has won the right to stay :mrgreen:

It is good to hear that it plays well with strats/teles, as I mostly use a strat.

I am still planning on getting the SBEQ, but have to give my wallet a little break. It would be great to use it to beef up the tone a bit and make the single coils sound humbucker-like.


strings2wood, great poem and pic. I haven't seen Marvin the Martian in forever.

cheers,
Jon
RMC3FL>Gemini III>Sunface> Gramps+>Atomic Boost>PC-2A>MGV>Timmy>T1m Buffer>EGDM4K>LGW>Fetto C-Luxe>DRD/DRD Hot/HBeest>HBOD>Black '65>SBEQ>DBD>Launch Pad>ST-200>Solemate
jonnyrocket
 
Posts: 147
Joined: Sat Aug 28, 2010 12:29 pm
Location: NYC
Guitars:: LsL Saticoy Milan (9.5” Soft V maple neck, ash body, Alinco V pickups), PRS SC 250 (SD Pearly Gates), Taylor 314ce.
amps: Swart AST MKII (Swart Cab with one 12” Scumback H75 Speaker)
pedals: 20

Re: Should the SBEQ replace my current EQ pedal?

Postby melodichaotic » Tue Sep 07, 2010 8:52 am

Hey Jon-very good advice from these two.
Treble setting is critical to tune to your
rig-makes all the difference.
Also, voltage variations are highly reactive
with the EGDM-a lot to play with there.
As well, the voicing knob has a lot of swing
and can make single coils sound fat towards
the CCW side.
Lastly, it excels at lower gain, boost settings
where you can impart some AC 30 flavor to
your sound, and the compression characteristics
are great--there is a LOT to play with! :pedallove :music
melodichaotic
 
Posts: 548
Joined: Wed May 13, 2009 11:38 pm

Re: Should the SBEQ replace my current EQ pedal?

Postby strings2wood » Tue Sep 07, 2010 8:55 am

jonnyrocket wrote: I haven't seen Marvin the Martian in forever.
cheers,
Jon


Click on the link Jon......for an earth shattering kerboom!

Download: http://www.gargaro.com/MaRvInWaVs/boom.wav



Be careful....you could reminisce for ages here........

http://www.gargaro.com/marvinsounds.html

the poem wasn't intentional,
but thanks for making it mentionable
finding a rhyme for thesjkexperience
that followed iambic pentameter adheriance..........................................................................was just too frikkinhard!!!!!!!!
Image
...it's ok...I'll shut the door on the way out.....
User avatar
strings2wood
 
Posts: 228
Joined: Mon Oct 15, 2007 8:46 am
Location: Melbourne, Australia
Guitars:: C.S. '56 Strat; C.S. '57 Tele; C.S. 53 Tele; Martin John Mayer OM-28; Maton FG-100;
amps: Fender Blonde Tolex Vibro King;
Matchless Lightning 2 x 12 with reverb;
pedals: 0

PreviousNext

Return to BJFE Discussion

Who is online

Users browsing this forum: Google [Bot] and 1 guest