BJFE / BearFoot fx Guitar Effects Community

OK here we go, 46 are on the list next 4 are priced at 10/board 20/kit then they go up to 15/board 30/kit until the boards are gone. I will send the order off soon. However, the boards will take about 3 weeks to get to me then I need to build one, test it, then get everything together for shipping all these out. So be patient. Remember if I see any of these built and selling on E-bay, TGP, or God forbid here I will stop selling the boards and send all the remainders to Donner or Bjorn.

Here is how to order.....

Paypal to [email protected]

For orders that are paid for before I ship out the first batch prices are.

Each Board is $10 + $2 S/H each additional board is $1
Each Kit is $20 + $3 S/H each additional board/kit is $1
For shipments outside the US please double the S/H.

Example one kit and one board will be $34.00 (Kit -$20 + $3, Board $10 + $1).

In the remarks section of your payment please include your member name here on BJFE.org and what you are ordering.

Example:

Jfromel = 2 kits, 1 board, total $55

there are 100 boards total, 60 of which are spoken for and 27 are already paid.

Jagattack - paid for 1 X Board and 1 X Kit. Big thanks to Jfromel for organising this!

davec69 - 2 kits and 2 boards paid

OK we have 50 orders and 8 are paid for. From here out any orders will be at the higher price. I am ordering 100 boards total, and I don't think I will do another run.

The second 50 are at a bit higher price because even though my cost per board goes down a little when I order 100, my total cost goes up quite a bit and I think I will have some leftovers and I have to cover that.

TO CLARIFY: if you put your name on the list before this post either here or on TGP you are in the first 50 and pay 10/board or 20/kit.

OK The boards have been ordered. I did a run of 100, there are 50 ordered and 13 paid. The boards will be here in about 2 weeks then I need to make up a couple test units prior to shipping. I can't wait to see how this group project goes it should be a lot of fun.

Hey J,

I paid for 2 kits. I hope you got the payment.

Do the kits come with a pedal casing (box) and switch, etc.? Are they missing anything that we would need to make the pedal? Thanks!

--Jamie

jfromel wrote:
The BOM for the kit is posted elsewhere but note that this is not a BYOC complete kit. All you get is the components necessary to populate the board and the trannies I am providing are silicone not germanium. You will need to get your own box, knobs, pots, jacks etc.

This project is meant to be an educational experience that brings us together to learn including where to source parts (for which there is a thread). The board and the kit are only part of the process. For the hardcore DIY geeks out there I have posted a template to burn your own PCB and someone else posted a Perf board layout.

$46 sent for two kits just now

Payment sent for 2 boards last Friday. Hope you got that!

Paypal sent for 2 Folk Fuzz kits....